NPE-240A

Required for Cascade/common vent installations with NPE-2, NFC-H, NFB-H, NHB-H, and NHB (NHB -110 & NHB-150 models) series units produced on or after September 15, 2016. Includes Cascade Cable (GXXX000546), VID jumper cable and common vent collar damper.

Allows all NPE, NPE-2, NPN, and NHW-A series models to control an external pump through the internal PCB.

Designed for NPE-A, NPE-A2, and NHW-A series. Allows for combined space heating and domestic hot water when paired with a recirculation pump (ComfortFlow™ on NPE-A and NPE-A2). Only works with AHU’s.

Designed for NPE-A. NPN-U, NPN-E, and NHW-A series. HotButton™ kit allows manual operation of a recirculation pump (ComfortFlow™ on NPE-A). Includes an add-on PCB, 1 push button and wall plate.

"Extra push button for use with HotButton and extra wall plate.

Extra wall plate for use with HotButton and extra HotButton push buttons.

NaviCirc is a simple plumbing device that uses the existing hot and cold water lines to reduce the wait time for hot water at the faucet without the need for a dedicated recirculation return line.

NaviCirc Valve Kit includes the NaviCirc Valve (PFFW-SXX-001) and two 1/2" x 3/8" flexible hoses and adapters.

This add-on accessory will enable customers with smartphones and tablets to control temperatures remotely, access usage data and receive diagnostic notifications on all Navien products (NPE, NPE-2, NPN-U, NPN-E, NCB-E, NCB-H, NFC, NFC-H, NFB, NFB-H, NFB-C, NHB, NHB-H and NHW-A).

NaviLink cable. Allows you to expand your NaviLink control to a maximum of 3 channels for monitoring 3 banks of 8 units. Requires NaviLink Control.

Designed to neutralize the condensate of up to: 16 units NPE, NCB, NFC, NFB, NHB-H and NHB); 11 units NFB-301C; 9 units NFB-399C

Replacement Media for Commercial Neutralizer.

Designed to neutralize the condensate of up to: 6 units NPE, NCB, NFC, NFB, NHB-H and NHB; 3 units NFB-301C; 2 units NFB-399C

Replacement Media for Light Commercial Neutralizer.

NPE series parts kit designed to help service in the field.

CC, CR, NR & NP series parts kit designed to help service in the field.

NPE-2 series parts kit designed to help service in the field.

NPN series parts kit designed to help service in the field.

¾” Lead-Free isolation valve kit with relief valve – 3 valve set: Cold, Hot, Recirculation Return. Designed to work with NPE-A2, NHW-AI, NHW-AE and NPE-A series units.

3/4” lead free isolation valves with relief valve designed to work on NPE, NPE-2, and NHW-A series units. Allows for easy and quick servicing of DHW systems. Use with Pipe Cover.

Required to cascade and common vent NPE, NPE-2, NPN, NCB-E, NCB-H, NFC, NFC-H, NFB, NFB-H, NFB-C, NHW-A series and NHB-110 & NHB-150 models.

This innovative accessory will make cascading up to 16 units in 2 banks of 8 easy for emergency same day replacements. The kits are configures in 2, 3, and 4 side-by-side and 2, 4 back- to-back allowing for up to 16 units in 30 configurations. Each kit includes: * 3/4” Service Valves with PRV * 3/4” NPT Ball Valve * 2” Copper End Cap * 2-1/8” Strut Clamp * 3/4” x 24” SS Corrugated Flex Connector * 3/4” x 18” SS Corrugated Flex Connector * 1-7/8” OD Strut Clamp * 3/4” X 3/4” Adapter * 1-1/2” Gas Union * 2” Copper Coupling * 1-5/8” x 18” Strut Channel (14ga) * 3/4” x 30” Gas Flex Connector * 1-1/2” FPT Galvanized Iron End Cap * Hardware Kit

2 back-to-back

2 side-by-side

3 side-by-side

4 back-to-back

4 side-by-side

Ready-Link® Rack (V3) Base. The free standing rack system is designed for infield assembly for indoor and outdoor installations. Designed to work with NPE, NPE-2, NPN, NCB-E, NCB-H, NFC, NFC-H, NHB, NFB, NFB-H, NHB-H, NHW-A series units. Base rack allows installation for up to 2 units back to back.

Ready-Link® Rack (V3) Add-on. The add-on rack is designed to expand the base rack system allowing up to 16 units back to back on a free standing rack system. Designed to work with NPE, NPE-2, NPN, NCB-E, NCB-H, NFC, NFC-H, NHB, NHB-H, NFB and NFB-H series units for infield assembly. Approved for indoor and outdoor installations.

Wall flange designed to work on 2” intake and exhaust pipe for a clean installation look in location where the pipe goes through the wall.

Wall flange designed to work on 3” intake and exhaust pipe for a clean installation look in location where the pipe goes through the wall.